The buttons on the WL-D71 remote
The WL-D72 is (almost?) identical.
| row/column |
1 |
2 |
3 |
4 |
 |
|---|
| A |
START/STOP
NEXT PAGE | | ZOOM W
| ZOOM T
|
|---|
| B |
SELF-TIMER
| MENU
| ^
|
READ/WRITE |
|---|
| C |
TV SCREEN
|
PREVIOUS BANK | v
| SET
|
|---|
| D |
DATA CODE
| D EFFECTS
| | ON/OFF
|
|---|
| E |
SERVICE | AUDIO MONITOR
| MIX ST-1
| MIX ST-2
|
|---|
| F |
REC PAUSE
| SEARCH SELECT
| |<<
| >>|
|
|---|
| G |
ZERO SET MEM
| REW <<
PREVIOUS ADDR | PLAY >
INCR DATA | FF >>
NEXT ADDR |
|---|
| H |
AUDIO DUB
| -/<||
| STOP
DECR DATA | +/||>
|
|---|
| I |
A/V INSERT
| PAUSE ||
STORE DATA | SLOW |>
| x 2 |
|---|
| J |
REMOTE SET
|
EJECT | |
RECORD |
|---|
Noteworthy are the following buttons, in normal mode:
- E1
- enter/exit service mode (twice to enter, once again to exit);
- F1 (REC PAUSE)
- sets the camera ready to record, can also
be done with the red button on the body;
- J2
- eject tape (you don't want to use this!);
- J4
- start recording right away.
and in service mode (remove tape first):
- A1(start/stop)
- move to next page of settings;
- B4 Read/Write
- in write mode you can change the value of the
current PaGe/BanK/ADDRess, but not all addresses are writeable;
- C2
- move to previous bank (from 0 to 7 -> 6 -> ... 0);
many banks appear not to be accessible, or do not exist?
- E1
- enter/exit service mode (twice to enter, once again to exit);
- G2 (REW)
- decrease ADDRess;
number under DT (DaTa) will change accordingly;
- G4 (FF)
- increase ADDRess;
number under DT (DaTa) will change accordingly;
- G3 (PLAY)
- increase DaTa;
doesn't really change anything unless in WRite mode;
not stored until the store data button (I2) is pushed;
- H3 (STOP)
- decrease DaTa;
doesn't really change anything unless in WRite mode;
not stored until the store data button (I2) is pushed;
- I2 (PAUSE)
- store DaTa, actually stores the changed data when in WRite mode;
- J2
- eject tape (you don't want to use this!).